Warning: The wire rope safety factor on our 90 ton is 5 to 1 and I assumed it was way lower
So I've been running a Grove GMK4090 for about two years now and last week our safety guy handed out these little cards at the morning meeting in Corpus Christi. The card broke down load limits on wire rope and I saw the number 5 to 1 printed right there for the running rope. I always figured the margin was thinner than that, maybe 3 to 1 on a good day, so seeing it spelled out kind of reset my head. Turns out the old rigger who trained me back in 2019 kept saying the rope is the last thing to worry about if you do your math right, and now that stat makes his point for him. It also made me go back and recheck the inspection log on the drum and the dead end, since a bigger margin only helps you if the rope is in good shape to begin with. We had a chafed spot near the becket that got flagged and swapped, and honestly I would have let it ride before seeing those numbers. Does your crew post the factor somewhere on the machine, or is it just buried in the manual like ours?