Used to finish every slab with a 6 ft straightedge, now the laser screed does the thinking
Five years back on a 4,000 sq ft warehouse floor outside Fresno I was out there with a 6 ft straightedge and a guy on the other end, checking every pass by hand until my knees were shot. We picked up a laser screed about 18 months ago and the flatness numbers on our last few pours came back tighter with half the guys on the screed, so I stopped fighting it. How many of you have made that switch, and did you keep the hand method for edges and small rooms or just trust the machine everywhere?
Keeping the hand method for edges and small rooms makes sense because that is exactly where the machine can't help much. A laser screed needs room to work and a straight run, so tight corners, doorways, and little utility rooms still come down to a guy with a straightedge and a good eye. Honest take is the screed earns its keep on the big open bays, then you finish the odd spots by hand and don't feel bad about it. What really sold me on your point is the tighter numbers with half the crew, because less fatigue on the guys means fewer sloppy mistakes at the end of a long pour. Trusting the machine everywhere is how you get caught on a job that doesn't fit its footprint.